Omron C200H-TV001, Operation Manual

Page: 17 / 71

Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
12
Crimp terminals are recommended for the wiring. Take care not to overtighten
the terminal screws. Tightening torque must not exceed 78 N
cm (8 kg cm).
Crimp Terminals
The screws on the terminal block are M3.5 self-rising terminal screws. Use the
following types of M3.5 crimp terminals.
7 mm max.
7 mm max.
Soldered Lead
Strip insulation from 7 to 10 mm at the end of the wire and carefully solder the
lead.
7 to 10 mm
ÉÉÉ
ÉÉÉ
10
Compensating Conductors Connect a thermocouple with the appropriate compensating conductor from the
table below.
Type of thermocouple Compensating conductor
Classification by
li ti d
Constituent materials
Symbol Previous
symbol
(reference)
Symbol Previous
symbol
(reference)
y
application and
tolerance
+ conductor – conductor
B --- BX-G --- General-purpose,
t d d l
Copper Copper
R --- RX-G, SX-G ---
standard class
Alloy with copper
i k l j
S --- RX-H, SX-H --- Heat-resistant,
standard class
y
or nickel as major
constituent
K CA KX-G WCA-G
General-purpose,
t d d l
Alloy with nickel
h
Alloy with nickel as
j tit t
KX-GS WCA-GS
standard class
y
or chrome as
major
y
major constituent
KX-H WCA-H Heat-resistant,
standard class
major
constituent
KX-HS WCA-HS Heat-resistant,
precision class
WX-G WCA-G General-purpose,
standard class Iron
Alloy with copper
or nickel as major
tit t
WX-H WCA-H Heat-resistant,
standard class
j
constituent
VX-G WCA-G General-purpose,
standard class Copper
E CRC EX-G WCRC-G General-purpose,
standard class Alloy with nickel
or chrome as
j
EX-H WCRC-H Heat-resistant,
standard class
major
constituent
J IC JX-G WIC-G General-purpose,
standard class Iron
JX-H WIC-H Heat-resistant,
standard class
Terminal Block
Connections
Wiring
Section 2-3
17 / 71
17 / 71