Distributor of Omron Automation & Safety: Excellent Integrated System Limited
Datasheet of C200H-DSC01 - DATA SETTING CONSOLE
Contact us: [email protected] Website: www.integrated-circuit.com
8
Switch no.
Pin 1
Pin 2
Function
Switching memory contents
Setting direction
ON
Normal
C200H PC
OFF
Fixed
Data Setting Console
The new setting is valid immediately after the switch setting is changed.
Removing and Attaching the Cover
Removing the Cover
Attaching the Cover
Insert a small flat-blade screw-
driver between the case and
the cover at the top of the Unit
and lever off the cover.
Place the right edge of the
cover against the case and
press into position.
Switching Memory Contents
The methods for designating parameters differ as shown below.
Normal
Parameters can be designated as required using
commands. (Refer to
4-1 Memory Allocation).
Fixed
Parameters are allocated in advance.
Refer to
4-1 Memory Allocation
for details of the memory contents.
Setting Direction Selector
Selects whether the data settings are made from the Data Setting Console or
from the C200H PC, using a user program or Programming Console.
Executed Bank Number
The setting of the executed bank number is made from the C200H PC, regard-
less of the ON/OFF setting of this switch.
Input Type
SW202
Input type setting
C200H-TV00
8
9
0
1
2
4
3
5
6
7
Setting
0
1
2
3
4
5
6
7
8
9
Sensor type
R
S
K
J
T
E
B
N
L
U
The switch is factory-set to 2.
The selected position is shown by the arrow. Turn the switch with a small flat-
blade screwdriver.
Selected position
Switch Settings
Section 2-2
13 / 71
13 / 71
