Omron C200H-CP114, Operation Manual, Page: 43 / 75

29
Memory Allocation Section 4-1
I/O
classifi-
cation
Bit number Data item Data contents
Word Bit
In n+2 15 to 00 Internal/external
cam output status
When an internal/external cam output turns ON, the appropriate bit
turns ON. Bits 00 to 15 correspond to internal/external cam output
numbers 01 to 16.
n+3 15 to 00 Internal cam output
status
When an internal cam output
turns ON, the appropriate bit turns
ON. Bits 00 to 15 correspond to exter-
nal cam output numbers 17 to 32.
n+4 15 to 00 Bits 00 to 15 correspond to exter-
nal cam output numbers 33 to 48.
n+5 15 to 12 --- Not used. Set to “0.”
11 to 00 Present cam angle Monitors the present resolver cam angle. 000
°
to 359
°
(3 digits BCD)
The value will be indefinite if the Resolver has been disconnected.
n+6 15 to 00 Number of process
execution cycles
(see note 1)
n+7 15 to 08 --- Not used. Set to “0.”
07 to 00 Bank being exe-
cuted
Monitors the bank that is presently being executed. 00 to 08 (2-digit
BCD)
Monitors the number of process execution cycles (the number pro-
duced) per minute, in 4 digits BCD.
Number of process execution cycles = Number of resolver rotations/
number of rotations required for a single process (unit: shots/min)
This value is the same as the value displayed at the Data Setting
Console in Mode 1.
15 00
Numeric Data
(000 to 999: 3 digits BCD)
Decimal Point Position Data
1: No digits to right of decimal point
2: 1 digit to right of decimal point
4: 2 digits to right of decimal point