Omron C200H-CP114, Operation Manual, Page: 16 / 75

2
Features Section 1-1
1-1 Features
The Cam Positioner Unit detects angles of rotation by means of a connected
resolver and provides cam outputs with preset ON/OFF angle data.
Numerous Cam Outputs
and Set Data Items A maximum of 48 cam outputs (16 internal/external and 32 internal) are avail-
able.
A maximum of seven ON/OFF data items can be set for a single cam output.
A maximum of eight banks of cam data can be present, with each bank con-
sisting of 48 cam outputs.
A bank can be selected from the C200H by means of either a peripheral tool
such as the Programming Console or the C200H user’s program.
Applicable Resolvers Any OMRON-made resolver can be used.
To connect a resolver to the Cam Positioner Unit, use the 20-cm-long auxiliary
connection cable that is provided. When using a resolver with no cable
attached, prepare a cable for the resolver.
Response Accuracy Responds at a maximum angle-detecting cycle of 200
µ
s (with a sampling fre-
quency of 5 kHz) and at a maximum resolver speed of 800 revolutions per
minute.
An angle unit of 1
°
is used for cam output control (resolver resolution).
Data Input and Display For inputting data, displaying present values, and so on, use the C200H-
DSC01 Data Setting Console (sold separately).
The display is easy to read and can be panel-mounted.
Data can also be set by means of the C200H user’s program.
Easy Adjustment ON/OFF data can be set or altered by actually moving the machine.
Origin adjustment is possible with either the origin adjustment switch on the
front panel of the Cam Positioner Unit or an Origin Adjustment Flag. (Origin
adjustment matches the resolver origin with the mechanical origin.)
Cam Data Can be
Protected After debugging and trial operation, the final ON/OFF cam output data can be
protected.
To protect the data, set the protect setting pin to “permitted” and make the set-
ting with the Data Setting Console.
Independent protection is possible for each bank and cam output.
Cam Data Can be Set from
the C200H It is possible to set cam ON/OFF data and required revolution data for a single
process via the C200H
(using a peripheral tool such as the Programming
Console, or the user’s program).