Omron 3F88L-160, Connection Manual

Page: 5 / 12

Connection manual of XDesignerPlus external devices 5 / 12
(2) External device settings
Set the function parameters of the external devices as shown below. Please refer to the User's Manual of external devices for more
detailed settings.
1. Set
“Function No. b, Parameter No. 6” as “ 1 ”.

Set the Parity bit 9600 bps(factory setting)
2.
Switch the power of the external device “off”

“on”.
3. Set
“Function No. t, Parameter No. 0 “ as “ 0 ”.

Slave Unit into transmission enabled mode.