80-JB566-1 Rev. G
10-3
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
System Verification
Performing System Verification
CDD and Ignition On should have a green checkmark.
For information on the
Details
button, see
Chapter 21: Core Data Problem
.
If the results of the
Run All
Tests are acceptable, send a message from the unit and verify
the message is received by dispatch. Once that is confirmed, have dispatch send a message
and confirm the message is received. If installation is done after hours, call Customer
Support to verify the message is sent and received.
Once this is done, System Verification
is complete.
CDD Database Sync
Will show a green checkmark when database has been
synchronized with NOC (usually takes 5 to 10 minutes after
unit is first powered up). See
Chapter 16: CDD Database
Sync Problem
if red X.
Ignition On
Will show a green checkmark if the ignition is ON. See
Chapter 20: Ignition On Detection Problem
if red X.
J1939 Packet Detection
Will show a green checkmark if connected to the J1939
databus, the vehicle’s ignition is ON, configured to look for
J1939, and its getting data. All vehicles do not have J1939.
See
Chapter 19: J1939 Packet Detection Problem
if red X.
J1587 Packet Detection
Will show a green checkmark if connected to the J1587
databus, the vehicle’s ignition is ON, configured to look for
J1587, and its getting data. All vehicles do not have J1587.
See
Chapter 18: J1587 Packet Detection Problem
if red X.
Use scroll bar to see
all results.
Second page of tests
