Installation Procedure
In-Cab Scanner Diagnostic Procedure
27-4
80-JB566-1 Rev. G
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
7.
Insert the black and white calibration page or plain white paper into the slot.
8.
Tap the
Calibrate
button. Wait a few minutes for the calibration to complete.
9.
Tap the
Scan
tab to return to the scanning home screen.
10.
Send a scan. On the Home screen, tap the
Scanning
button.
11.
Select the Document Type from the drop-down list.
12.
Insert the paper, face down.
•
The paper will go in about 1/2".
•
If the paper is not 8-1/2" wide, line it up with the right edge.
Note
The small tooth in the slot must be covered.
