80-JB566-1 Rev. G
C-5
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
General Wiring and Installation Guidelines
Crimping
2.
After crimping the inside of both ends of the butt splice on the “insulated” area of the
crimping tool, next crimp the outside of both ends of the butt splice.
3.
Verify that the crimps are good and the wires have not been damaged.
03AAA_271
Crimp here
Crimping Tool
INSUL
UNINSUL
Wire crimp
Crimping locations
Inside crimp (stripped wire)
Outside crimp (insulated wire)
03AAA_273
Outside crimp (insulated wire)
Inside crimp (stripped wire)