Safety, Reliability, and Accessibility
Installation Planning
3-2
80-JB566-1 Rev. G
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Safety, Reliability, and Accessibility
•
Use eye protection when using a drill/performing work that may be hazardous to the eyes.
•
Use ear protection in noisy work areas.
•
Wear appropriate clothing/uniforms and safety shoes.
•
Maintain three points of contact when climbing in and out of cab.
•
Make sure you know what is behind the area before you drill.
•
Install equipment so it will not cause damage to the vehicle or work loose over time.
•
Make sure there are no loose components/cables and no unsecured components.
•
Use solid mounting surfaces.
•
Route all cables away from hot or abrasive areas.
•
Choose installation locations where components can be easily serviced.
•
Choose installation locations where components are safe from tampering and damage.
Tools and Supplies Recommended for Installation
•
Crimpers
•
Diagonal Wire Cutters
•
Wire Strippers
•
Screwdrivers: Phillips #2 and Slotted
•
Torx Drivers: #20 and #25
•
Volt/ohm Meter
•
Flush Cutters
•
Flash/Drop Light
