Omni30 User Manual
- 9 -
UMC1620AR04
2. MECHANICAL INSTALLATION
2.1 Mechanical Dimensions
Figure 2-1 –Omni30 Mechanical Dimensions
2.2 Panel Mounting
The panel mounted Omni30 series units may be mounted individually or in groups in a
single cut-out in the panel. Each annunciator is mounted using its own mounting studs. See
the Mechanical Dimensions above for detailed requirements for the cutout.
If incandescent lamps are installed in the windows in these units, then the maximum
number of units recommended in a single cut-out is 6 units to prevent excessive heat build-
up.
2.3 19 inch Rack Mounting
Some of the Omni30 Series units are available in 19inch Rack mountable enclosures.
