Omni30 User Manual
- 17 -
UMC1620AR04
NB! Once the Serial Port (DB9) Option has been fitted the Serial Jack plug facility
normally used to configure the annunciator is disabled. Configuration must be done
through the DB9 Serial Port once it is fitted to an Omni30.
3.7 Power Requirements
The Omni30 range is 24Volt dc powered.
The table below gives the maximum current requirement of each of the products in the
range.
Model
Max Current Consumption at 24Volts dc
C1620
Omni30/8
8 Way Alarm
1.1 Amps
C1621
Omni32/8
4 Way Alarm + Control
0.8 Amps
C1622
Omni33/8
Control
0.2 Amps
C1623
Omni30/4
4 Way Alarm
0.6 Amps
C1624
Omni33/4
Control
0.2 Amps
Table 3-1 Omni30 Power Consumption
Note: This power consumption excludes the requirements of external Horns or displays used in
conjunction with these products, but is given with all Lamps on.
