Omni30 User Manual
- 3 -
© Omniflex
UMC1620AR04
SCOPE
This User Manual provides information necessary to install, configure and operate your
Omni30 product.
This manual covers the following product Model Numbers:
Model
Product
Description
C1620
Omni30/8
8 Way Alarm Module
Panel Mount (483mmW x 44.5mmH)
C1620-1
Omni30/8-SL
8 Way Alarm Module
19 inch Rack mount (483mmW x 44.5mmH)
C1621
Omni32/8
4 Way Alarm + Control Module
Panel Mount (483mmW x 44.5mmH)
C1621-1
Omni32/8-SL
4 Way Alarm + Control Module
19 inch Rack Mount (483mmW x 44.5mmH)
C1622
Omni33/8
8 Way Control Module
Panel Mount (483mmW x 44.5mmH)
C1622-1
Omni33/8-SL
8 Way Control Module
19 inch Rack Mount (483mmW x 44.5mmH)
C1623
Omni30/4
4 Way Alarm Module
Panel Mount (267mmW x 44.5mmH)
C1624
Omni33/4
Control Module
Panel Mount (267mmW x 44.5mmH)
Introduction
The OMNIFLEX Omni30 family is a range of alarm annunciators designed using the
OMNIFLEX Omni16c alarm annunciator technology, packaged in 10.5inch and 19inch
housings, in 4 and 8 way configurations.
All products in the range are available “off-the-shelf” with no factory customisation
required. Because these units are not built to order, spares holding and maintenance are
significantly reduced.
Alarm display options include long-life incandescent lamps for lowest initial cost, or high-
bright back-lit LED’s for best life cycle cost and lowest power consumption and reliability.
Display legends for the backlit displays are created by the user on any standard
laser/inkjet printer using software templates supplied with the product.
All popular configuration options are accomplished by switch settings externally available
on the unit.
Additional options include:
•
27 alarm sequences as standard for widest range of applications.
•
Flash synchronisation between modules.
•
A Software Configuration Utility for more advanced customisation.
