Omni30 User Manual
- 11 -
UMC1620AR04
5. Cut along the cut marks which will print onto the film to produce the number of individual
legends required.
6. Insert them into the Omni30 as described in section 2.7.
Please note that the supplied templates have been tested on a wide range of printers. Your
particular printer may scale the image slightly differently. While the front grid markings
should accommodate this tolerance, in exceptional circumstances you may have to alter the
grid spacing on the template supplied. This needs to be done once only and will then be set
for your printer.
2.7 Inserting Legends and Colour Filters into Back-lit Display Windows
2.7.1 Colour of Windows
If Back-lit LED boards are used, then the colour of the window can be set by the
choice of LED lamp board colour, and no additional colour filters are required.
If incandescent lamps or white LED boards are used, then a coloured window filter
can be inserted into the window to provide the required lamp colour.
These coloured filters are provided in a kit of assorted colours supplied with the
product.
Each kit of coloured filters contains the following:
C1663 Colour Filter Kit Contents
8 Red Filters
8 Yellow Filters
8 Green Filters
4 Blue Filters
Additional Colour Filter Kits may be ordered as desired by quoting Model Number
C1663.
2.7.2 Assembling Back-lit Display Windows
Assemble back-lit windows into the Omni30 as follows:
1. Assemble each window as shown in Figure 2-2 Backlit Window Order of Assembly.
2. Snap the assembled window into position in the Omni30 Alarm unit.
