Omni30 User Manual
- 7 -
© Omniflex
UMC1620AR04
1. GENERAL DESCRIPTION
1.1 Standard Features
•
Standard 4 and 8 point modules allow integral systems from 4 to 128 points to be
constructed by the user.
•
All products in the range are supplied off-the-shelf with no factory customisation
required, to minimise spares holding.
•
Panel mounted display options include long-life incandescent lamps or high-bright
back-lit LED’s.
•
User-created display legends on standard laser/inkjet printer using software templates
supplied – no window engraving required.
•
Plug-in terminals for easy installation and maintenance.
•
Switch selectable Normally Open or Normally Closed input contact sense selection
while installed. No dismantling required.
•
27 switch selectable alarm sequences built in, covering most alarm annunciator
specifications and configurations.
•
24Volt dc powered.
1.2 Options available
•
Fully isolated RS232/422/485 Modbus
©
compatible serial port to interface to PLC,
DCS, or SCADA systems.
•
Advanced Software Configuration Utility to configure the Omni30 in “SOFT-SET” mode
for more specialised applications.
1.3 Rear Views of the Omni30 Series products
Figure 1-1 – Panel Mount Omni30/4 Rear View
Figure 1-2 – Panel Mount Omni33/4 Rear View
