CHAPTER 11 |
60
DISPLAY AND METER OPTIONS
11
Display Options and Meter Options
As mentioned earlier in this manual (and as you may have noticed as you wind your way through the various
menus), there are two sub-menus that appear frequently at the bottom of many menu pages:
Display
Options
and
Meter
Options
. These also appear in the main Processing menu and the Home menu.
Display Options Menu
As mentioned in Chapter 4, the front panel of Omnia.7 can simultaneously display a variety of meters and tools in
up to six windows at once.
Since the amount of screen “real estate” available for each display decreases as additional windows are added, six
available
Memory
Slots
can be set up in different display configurations allowing you to choose which processing
parameters or visualizations from one of Omnia.7’s valuable built-in diagnostic tools are viewable in each window.
For example, you may wish to devote one preset to nothing but the Undo and Processing Meters to display these
parameters in greater detail. Or, you could devote an entire preset to the oscilloscope and monitor the program
input, the output of Undo, the MPX before the clipper, and the MPX output to see what the various stages within
Omnia.7 are doing to the audio signal. The combinations are endless and yours to customize to suit your particular
needs and preferences.
You can also turn off any or all of Omnia.7’s displays here – a handy feature for keeping your processing meters and
settings from curious eyes!