manualshive.com logo in svg

Omnia 7AM, User Manual, Page: 115 / 139

Share
Download
Omnia 7AM User Manual Download Page 115

CHAPTER 16  | 

106

SYSTEM MENU

File Recorder Menu

Omnia.7 features three built-in file recorders that allow you to capture audio from various points within the 
processing chain onto a USB flash drive or hard drive. 

Before you begin, select the 

Name

 input field and assign a name to your new file. Then choose which processing 

core (AM, HD, or Studio) and patch point you would like to record from using the 

Audio Selection

 menu. Finally, 

enable “Rec” to start recording. 

 

♦

Selecting 

Start All

 from the File Recorder 1 menu allows the “Rec” control in File Recorder 1 to act as a 

master start/stop control for all three recorders. This is useful for making exactly the same recording in all 
three recorders but from different patch points. Unchecking 

Start All

 returns individual control to each 

recorder. 

 

♦

The 

Gain 

slider controls the input level into the recorder. If, for example, you are recording from the MPX 

patch point with this control set at -3dB, you will get a -3dB peak MPX file, suitable for use in a modula-
tion monitoring software program such as MpxTool. 

 

♦

The 

Vox 

control, when enabled, pauses recording when no audio is present and has a selectable timeout 

setting.

 

♦

The 

Minimize File Size

 control automatically adjusts the recording resolution to match the actual noise 

floor of the audio, allowing you to record a full hour of off-air MPX audio in a file size of only 500mb. The 
resulting FLAC file can still be read by any program that supports FLAC.

If you are recording directly from the Omnia.7 or on a remote computer with a high speed connection to Omnia.7, 
the Source window will show “PCM” indicating the recording will be uncompressed PCM source data. If you have 
a slower remote connection, the window will show “Vorbis” indicating that you will be recording the decoded 
output of a lossy codec. In either case, the recorder always produces a FLAC (Free Lossless Audio Codec) file. 

You also have the option to use Omnia.7’s Time-Based File Splitting feature, which allows you to record files of a 
specified length (15 minutes, 30 minutes, 1 hour, 2 hours, 3 hours, or 4 hours). As it is sample-accurate, you can 
splice the files together after recording if you like. There is no file limit size (other than the amount of space on your 
external drive) so file splitting is not required, but an option.

Summary of Contents for 7AM












































































































































Reviews:

No comments