OMNI 4000/7000 Operations and Maintenance Guide
– Rev F
7-43
Maintenance
5.
a. Confirm that any modules that
previously said
N
under the
SW
column now say
Y
, indicating that their
software has been updated to reflect
the hardware installation.
b. Confirm that any modules that
previously showed
N
under the
HW
column no longer appear on the
screen after the list has been updated,
which indicates that the module has
been removed.
6.
When complete, press the
Back
key to
return to the
Utilities
screen.
7.3.10 Secure Digital Card
The Secure Digital (SD) card stores all data from the flow computer. If the card is full or there is a
problem and it needs to be replaced, the flow computer will give an error message.
To eject an SD card and format a new card, follow these instructions:
1.
a. In the
Home
menu, use the arrow
navigation keys to go to and select
Utilities.
b.
Press
the
OK
key.
2.
a. Use the arrow keys to scroll down and
highlight
SD Card
.
b. Press
OK
.
3.
On the flow computer CPU module,
physically remove the protective adhesive
tape covering the SD card slot.
In this example, the
E-2 module
has been physically removed from
the flow computer, and after
performing the
Check Modules
function, it no longer appears in
the module list.
