OMNI 4000/7000 Operations and Maintenance Guide
– Rev F
7-37
Maintenance
2.
a. On the
Utilities
screen, use the arrow
keys to navigate to the
Calibration
menu selection.
b. Press
OK
.
3.
a. Use the arrow keys to scroll down and
highlight
Maintenance Mode
.
b. Press
OK
.
4.
Maintenance Mode is disabled by default.
Use the right and left arrow keys to
navigate to different Meter Runs, if
needed.
When ready to enable Maintenance Mode,
press the
FR/Totals
function key.
5.
The
Maint Mode Flow/Totals
screen
displays a list of all the flow rates and
totalizers you can adjust in this mode.
Press the
Set Res
function key to enter
new decimal resolutions.
6.
Use the
Up
and
Down
arrow navigation
keys to scroll to and highlight the flow or
totalizer decimal resolution you wish to
change and press
OK
to open the entry
field.
7.
Enter the new value for your selection and
press
OK
.
