Figure 6-6 Proper Wi-Fi® Configuration
6.4 Connect Datalog X-PRO to Sigfox® Wireless Networks
By default Datalog X-PRO is automatically connected to Sigfox® networks to transmit data, if it
counts with the required module; so the user does not need to do special configuration to make
use of this technology.
NOTE:
For proper operation select the correct Sigfox® module Configuration in the
Datalog X-PRO
(
see
section 6.2.4
) depending of the Sigfox® Zone coverage.
USA, Mexico, Brazil:
Sigfox® Zone 2.
Latin America and Australia:
Sigfox® Zone 4.
6.5 Check Other Settings
If you wish to see the factory ID of the Communications Module that is being configured, its
firmware version, its MAC, or its latest assigned dynamic IP, follow the next steps:
1. On Home Page, press the More Info
button to be directed to a list with all this data.
www.omicroning.co March 2020
31
