Appendix B:
Installation Procedure for a New
Sensor
Exceeding the ranges defined for any Interface channel could cause damage or
unpredictable operation, which could result in death or severe personal injury
and/or property damage. To avoid any risk, Datalog X-PRO manufacturer should
be reached to receive further assistance on how to properly connect peripherals.
Remember that Contact Information is provided at the beginning of this
document.
Use only original parts supplied for the manufacturer, the use of not original
parts is prohibited, It could cause damage or unpredictable operation, which
could result in death or severe personal injury and/or property damage.
Always observe the following safety instructions for connect the sensor
interfaces:
●
Connections should be made only by trained personnel authorized by the
manufacturer.
●
Connections must be made only in the complete absence of line or battery
voltage.
●
Remember that in order to use the Interface, it should be factory
programmed with a firmware that would allow readings from the only
choose sensor type.
●
For correct sensor connection use only the proper sensor connection
guide, see
Appendix C
, an incorrect sensor connection can produce
malfunction, or security risk.
www.omicroning.co March 2020
43
