MF 64
Author: Donato Gavino Murru [email protected]
Pag.
84
a
179
Adjustments & Setup
When inserting a roll of different width for the first time, you need to adjust the side part, where
there is a screw with handle-wheel.
Adjust the width of the unroller accordingly to the dimension of the roll.
Install on sliding table a new roll of non-woven material.
Pay attention to install the new roll with the proper direction of feeding
of the roll to have proper functioning of the device.
Adjust the width with the handle-wheel in order to
center the material with the center of material index.
Install the roll in this groove.
