MF 64
Author: Donato Gavino Murru [email protected]
Pag.
66
a
179
1 ground cable
ATTENTION: the operation must be done by a qualified electrician
authorised by the customer. Bad peeling of the cables can cause
an accidental contact between phases or ground.
ATTENTION: Before applying voltage to the machine, make sure
main disconnect switch cover is installed and that all previously
operations are done properly. Turn on main disconnect switch
before using control board power selector switch.
ATTENTION: after giving the power check if the phases are well
connected. For example, try to lift up and down the roll supports on
the enroller, if turn non in correct way turn off the main power and
exchange two phases (please take a look the instructions above)
This bar must be aligned with
the black handle in order to
close door cabinet properly.
Black handle (turn clockwise to
power on the machine).
