“
OPTION
”
•
Pressing the
“
OPTION
”
button for two seconds can be used to activate
an extra output, known as the “2nd channel”, for an optional function
such as trunk release.
•
Pressing and releasing this button twice arms or disarms the system
without the confirmation chirps.
•
Pressing this button immediately after arming will leave the alarm
armed, but with the shock sensor feature bypassed.
•
Pressing the “
OPTION
” and “
panic
” buttons together operates the 3rd
channel output.
Red “panic” button
•
Pressing and holding the “panic” button for 3 seconds will activate the
remote Panic feature, but without locking or unlocking the doors.
•
The “panic” button can be reprogrammed so that it can operate an
additional 3rd channel output, instead of operating Panic.
- IMPORTANT -
The MAX-EDP is the most versatile vehicle security system made.
It has many programmable features and includes built-in program-
mable relays, which can offer more features and operations which
are described in the basic system instructions.
To a large degree, these extra features and operations are config-
ured at the installation of the system. Please read the sections of
this manual which explain programmable features, and please
consult your installer for specifics on how your system is config-
ured, and for installation options which may have used, or can be
added to system after installation.
EXAMPLE- the MAX-EDP can sound the vehicle’s horn in place of
or in addition to the electronic siren which is included with it. But
the operations are described with the siren only.
Page - 7
The Installer Programmable Features
The second group of 10 features, the Installer Programmable Features,
are accessed as the second level of features’ programming, which is
pressing the Valet Switch 10 times instead of 5 times when entering
Programming Mode (page 27). Caution: These features have a critical
affect upon the system’s operations, and in many cases, also upon the
system’s wiring connections. These features should NEVER be
changed, except by the installer or other qualified professional. The
companion Installation Instructions booklet should be consulted for wiring
connections associated with these features.
1
Doorlocking Functions
2
Light Relay Functions
3
Horn Relay Functions
4
Turbo Timer
5
Manual Transmission Remote Starting
6
“Tach Wire” or “Tachless” Starter Operations
7
Extended Starter Cranking Time
8
Programmable Remote Start Relay
9
Arm, Disarm or Additional Channels
10
Gasoline or Diesel Engine
Use the step-by-step instructions on pages 27-28, but press the Valet
Switch 10 times at Step 3, to change any of the Installer Programmable
Features. The feature’s option choices and related programming transmitter
button assignment found in the following individual feature descriptions.
Page - 38
Installer Programmable Features should only be used by the original
or other qualified installer, AND individual Installer Features should
only be used, where applicable, with the correct wiring connections.
Feature #1 Doorlocking Functions
Factory Default Setting
.8 Second Lock & Unlock Output
(press “arm/lock” button to program)
Options:
3 Second Lock & Unlock Output
(press “disarm/unlock” button to program)
Double Pulse Unlock Output
(press
“
OPTION
”
button to program)
Total Closure Lock Output
(press red
“
panic
”
button to program)
This single feature gives the installer several needed options, to match the
MAX-EDP’s doorlocking outputs to suite different vehicle requirements.