Emergency Override is custom-programmable! This is the SecureCode
feature, which is described on page 21. The above Emergency Override
instructions reflect the “as received from the factory” default setting.
Page - 13
Should you feel threatened, or the need to attract attention, you can
activate your system's remote “Panic” feature at any time by pressing and
holding for 3 seconds the transmitter’s “arm/lock”, the “disarm/unlock”, or
the “panic” button. Your system will respond by sounding the siren and
flashing the parking lights for the normal activated alarm period of 30
seconds.
Additionally, the MAX-EDP system features an unique “enhanced” remote
Panic operation, regarding additional operations during Panic, and in
association with the transmitter button used in it’s activation or deactivation:
Remote Panic Feature
To disengage remote Panic, simply press and release any one of the same
three transmitter buttons, or, allow it automatically stop after 30 seconds.
•
Activating Panic with the red “panic” button will not affect the system’s
armed or disarmed status; the doors locked or unlock condition; nor will
it affect the starter disable circuit.
•
Activating it with the “disarm/unlock” button will unlock the doors,
disarm the system and does not engage the starter interrupt.
•
Activating Panic with the “arm/lock” button will lock the doors, arm the
system and engage the starter interrupt.
•
Deactivating Panic with the “arm/lock” button will stop Panic, and leave
the
system armed with the starter interrupt engaged, and the doors
locked.
•
Deactivating it with the “disarm/unlock” button will stop Panic, and
leave the system disarmed with the starter interrupt disengaged, and
the doors unlocked.
•
If the system is allowed reset itself from remote Panic, it will enter the
armed state, locking the doors and engaging the starter interrupt,
regardless of which of the three buttons was used to activate it.
•
Deactivating Panic with the “panic” button will stop Panic, and leave the
system in the same state it was in at the moment Panic started, without
locking or unlocking the doors.
Feature #5 Ignition Activated Override
Factory Default Setting
Off (press “disarm/unlock” button to program)
Option:
On (press “arm/lock” button to program)
This feature allows an activated system to be overridden and disarmed by
simply turning the ignition switch on within 10 seconds of the system’s
activation. After 10 seconds, the Emergency Override must be performed
or the transmitter’s “disarm/unlock” button can be used to disarm the
system.
Feature #6 Doors Lock With Ignition On
Factory Default Setting
On (press “arm/lock” button to program)
Option:
Off (press “disarm/unlock” button to program)
This feature configures the system to automatically lock the vehicle’s doors
every time that the ignition switch is turned on. An exception to this would
be if feature #8 is turned on, and a door being open when the ignition switch
is turned on. The following feature #7 controls the automatic unlocking
operations, and feature #8 provides for an override of this automatic locking
if a door is open when the ignition is turned on.
Feature #7 Doors Unlock With Ignition Off
Factory Default Setting
On (all doors will unlock)*
(press red
“
panic
”
button to program)
Options:
Off
(press “arm/lock” button to program)
Driver’s Door Only*
(press “disarm/unlock” button to program)
All Doors Except Driver’s Door*
(press
“
OPTION
”
button to program)
Similar to the previous locking feature, except this feature controls the
unlock operations when the ignition is turned off, and it has more options
because of the MAX-EDP’s multiple unlocking outputs.
*Multiple unlock outputs offer the capability of unlocking only the driver’s
door when the system is disarmed (Driver Door Priority Unlocking), and
then the option of unlocking all doors with a second press of the “disarm/
unlock” button. The driver’s door unlocking differently from the other
doors must be configured when the system is installed!
If the system is installed without the Driver’s Door Priority Unlocking
interface, this feature unlocks all of the doors when the ignition switch is
turned off.
If Driver’s Door Priority Unlocking is installed, this feature can control only
the driver’s door unlocking when the ignition is turned, all doors unlocking,
or all doors except the driver’s. The following feature provides for an
override of this automatic unlocking if a door is open when the ignition is
turned off.
Page - 32
