![background image](http://html1.mh-extra.com/html/omega/hhp350-series/hhp350-series_user-manual_4158375011.webp)
Page 9 of 28
for 5 second time constant, it takes 5 seconds from the time of the
step change until the manometer displays the full value of the new
pressure.
To set the damp rate:
Keystroke
Display
1. Follow the steps on
page 4 to put the unit in
Program Mode
Top line reads
PROGRAM MODE” and
bottom line reads “UNITS
SELECT”.
2. Press the arrow
key.
Bottom line reads “DAMP
RATE SELECT”.
3. Press the PRGM key.
Top line reads “DAMP
RATE SELECT”.
4. Press the or
arrow key until the
desire desired damp rate
is displayed on the
bottom line.
Bottom line shows damp
rate in seconds.
5. Press the PRGM key.
Top line reads
“PROGRAM MODE” and
bottom line reads “UNITS
SELECT”.
6. Press the arrow
key.
Bottom line reads
“EXIT”.
7. Press the PRGM key.
Returns to Measure Mode.