![background image](http://html1.mh-extra.com/html/omega/hhp350-series/hhp350-series_user-manual_4158375008.webp)
Page 6 of 28
Units Select
The standard engineering units available on the Smart Manometer
are:
PSI
inH
2
0 (@20°C, 60°F and 4°C)
Kg/cm
2
kPa
mbars
Bars
cmH
2
O (@ 20°C)
inHg (@ 0°C)
mmHg (@ 0°C)
User Units
Flow Units
To change the engineering units the manometer should be “ON”
and in Measure Mode. Then follow these steps:
Keystroke
Display
1. Press the PRGM key.
Top line reads “PROGRAM
MODE” and bottom line reads
“UNITS SELECT”.
2. Press the PRGM key.
Top line reads “UNITS
SELECT” and bottom line shows
current engineering units.
3. Press the or arrow
key until desired
engineering unit is
displayed.
Engineering units on bottom line
of display change.
4. Press the PRGM key to
select the engineering unit.
Top line reads “PROGRAM
MODE” and bottom line reads
“UNITS SELECT”.
5. Press the arrow key.
Bottom line reads “EXIT”.
6. Press the PRGM key.
Display returns to Measure Mode
in new engineering units.