background image

1

Chapter  1  Introduction

1.1  Unpacking

Remove the Packing List and verify that you have received all equipment.  If you have any questions about the 
shipment, please call OMEGA Customer Service Department.

When you receive the shipment, inspect the container and equipment for any signs of damage.  Note any evidence 
of rough handling in transit.  Immediately report any damage to the shipping agent.

NOTE: 

The carrier will not honor any damage claims unless all shipping material is saved for their examination. 
After examining and removing contents, save packaging material and carton in the event reshipment is 
necessary.

1.2  Description

Featuring 5 digits of rate and 8 digits of total, the DPF500 meter is a battery powered indicator capable of accepting 
magnetic pickup, DC pulse and switch closure inputs. The unit can be ordered with an optional 4-20mA output.  The 
DPF500-MA uses the 4-20mA loop to provide power when this output is used.

1.3  Features

• Magnetic Pickup Input, Contact Closure Input, DC  Pulse Input  (Optically Isolated)
• Displays Rate & Total Simultaneously
• 5 Digit Rate Display
• 8 Digit Totalizer Display 
• 4-20mA Analog Output (-MA option)
• Powered From Internal Battery, or 4-20 mA Output Loop (-MA option)
• 20 Pt. Linearization (-LIN option)
• Isolated Scaled Pulse Output

1.4  Available Models

The following models are available from OMEGA Engineering, Inc.

PART NUMBER

DESCRIPTION

 

DPF501 

Panel Mount, Battery Powered* Ratemeter and Totalizer (NEMA-4 Front)

 

DPF502 

Wall Mount, Battery Powered* Ratemeter and Totalizer (NEMA-4 Enclosure)

 

DPF503 

Explosion Proof, Battery Powered* Ratemeter and Totalizer 

 

 

 

Class I, Division I, Groups B, C & D

 

 

 

Class II, Division I, Groups E, F & G

 

* All units may be powered from an external 8.5 -30 VDC to prolong internal battery life.

1.5  Available Options/Accessories

The following options (available at the time of ordering) are available from OMEGA Engineering, Inc.

PART NUMBER

DESCRIPTION

 

-MA 

Loop Powered with 4-20 mA output

 

-LIN 

20-point linearization

 

-BAT 

Battery Pack

 

-ET 

Extended Temperature Range

The following accessories are available from OMEGA Engineering, Inc.

PART NUMBER

DESCRIPTION

 

DPF5-BP 

External battery pack with 2 "C" size batteries and 12" leads

 

DPF501-BAT 

Spare battery

 

FPW-15 

15 VDC power supply

Summary of Contents for DPF500 Series



















Reviews: