51
LoC
Parameter Lock:
This function enables or disables
changing the settings of parameters.
Code:
0 - All parameter settings are changeable
1 - All parameter settings are locked; cannot be changed
2 - Only the main setpoint can be changed; all other
parameter settings are locked and cannot be changed.
STAT
Ramp/Soak Status:
The Ramp/Soak program automati-
cally changes the setpoint value with time in accordance
with a preset pattern, as shown in the figure on page 52.
This device allows a maximum of four ramp and four
soak segments. Ramp is the region in which SV changes
toward the target value. Soak is the region in which the
target value is maintained. STAT displays the current
ramp/soak status. No setting can be made.
oFF:
Not in operation
1-rP – 4-rP:
Executing 1st – 4th ramp
1-St – 4-St:
Executing 1st – 4th soak
End:
End of program
SV-1
Ramp Target Value:
Sets the target value for each ramp
to
to
segment.
SV-4 Setting range: 0-100% of full scale
TM1r
Ramp Segment Time:
Sets the duration of each ramp
to
to
segment.
TM4r Setting range: 00.00 to 99hrs 59mins.
TM1S
Soak Segment Time:
Sets the duration of each soak
to
to
segment.
TM4S Setting range: 00.00 to 99hrs 59mins.
