27
SETUP MENU
Operation
Display
1. Operational mode
– PV, SV
2. Press SEL key for about 3 secs
– “ProG” changes to “P-n1”
3. Press DATA key
– “P-n1” data
4. Press the appropriate UP key
– Corresponding digit blinks
once
5. Press the same UP key or the
– Data changes accordingly
DOWN key to increment or
decrement the data
6. Press ENT key
– Data registered; “P-n1”
7. Press SEL key once to go to
– “P-n2” ....... “dSP7”
the next parameter, or press
and hold UP (hundreds) key or
DOWN key to scroll down or up
the menu at a faster rate
8. Press SV (SV/PV for CN4420) key – Operational mode
SYSTEM MENU
Operation
Display
1. Operational mode
– PV, SV
2. Press SEL key
– ProG
3. Press DATA key
– oFF (default)
4. Press UP (units) key to scroll
– rUn/HLd blinks
down the options. DOWN key
does the reverse.
5. Press ENT key
– Data registered; “P” displayed
6. Press DATA key
– “P” data displayed
7. Proceed as described before.
Please refer to Quick Reference Guide for a listing of all of the Setup
and System parameters.
