Olympus BondMaster 600 User Manual Download Page 95

Page: 95 / 248

DMTA-10045-01EN, Rev. E, August 2016

Control Functions

Changing the Parameters in the PC RF DISP/DOTS (Display/Dots) Menu

The following information is applicable when the BondMaster 600 is set to PC RF

mode and the DISP/DOTS menu key (

) has been pressed.

RUN

The

RUN

setting controls the display mode that the probe is currently operating

in (see Figure 5-8 on page 86).

To change the

RUN

setting, press the A key, and then rotate the knob to the

desired setting.

The

RUN

setting can also be accessed and changed by pressing the RUN direct

function key (

) on the left-hand side of the BondMaster 600 front panel,

underneath the knob.

Changing the RUN will also change the availability of functions in the menus

accessed with the MAIN menu key (

), DISP/DOTS menu key (

), and

ALARM menu key (

NOTE

Summary of Contents for BondMaster 600

























































































































































































































































Search results

Summary of Contents for BondMaster 600

Reviews:

Related manuals for BondMaster 600

Brands by name

Popular brands

Olympus BondMaster 600, User Manual

Search results

Summary of Contents for BondMaster 600

Reviews:

Related manuals for BondMaster 600

Brands by name

Popular brands