Olympia Omega 2030CN, User Manual

Page: 122 / 222

Basic Scan to Email Operation 112
Scan to Email Using the Original Glass
1
Press the Scan key to enter Scan mode.
2
Remove all documents from the ADF.
"
If you are using the original glass to scan, do not load any documents
into the ADF.
3
Lift open the ADF cover.
4
Place the original document face down on the original glass and align the
document on the scales above and to the left of the original glass.
5
Gently close the ADF cover.
"
Closing it too quickly may cause the document to move on the original
glass.
6
Specify the email address of the recipient in one of the following ways,
and then press the
Menu Select key.
– Direct input
– Using the one-touch dial key
– Using the speed dial number
– Using the phone book function
"
For information on entering text , refer to “Entering Text” on page 118.
"
For details on specifying the recipient, refer to “Specifying a Recipient”
on page 115.
"
By specifying one TO address and 124 CC addresses, a total of 125
recipients can be specified.
"
Email addresses specified after the Scan key is pressed are set as
scan to email recipients.
7
Enter a title (subject), and then press the Menu Select key.
"
For information on entering text, refer to “Entering Text” on page 118.
"
If you do not want to specify the subject line, resolution and other set-
tings, press the
Start key, skip to step 16.
8
Enter the email address for any additional recipient as a CC address, and
then press the
Menu Select key.
"
If you do not want to specify CC address, press the Menu Select key
will skip to step 10.