Date 29/6/2021
Document number 921100409_09_002
Page 23 of 73
23 / 73
Figure3-11.Change time
By selecting “
WORKING DAYS
” the screen on the right is shown.
Use up/down keys to select day and click right key to enable or
disable this day. Filled box equals to enable. When set press Enter
to save.
Figure3-12.Working days
By selecting “
WORKING HOURS
” the screen on the right is shown.
First you need to set the working start time. Use up/down keys to
change digit number and left/right keys to switch between the digits,
then press Enter to save.
Then do the same for the end time.
Figure3-13.Working hours
3.4
Backlight mode
By selecting “
BACKLIGHT MODE
” the submenu on the right is
shown.
The first option, “
POWER SAVING
” will turn off backlight at any state,
after 1 minute of inactivity. The second option, “
BATTERY SAVING
”
will only turn off backlight while on battery power (mains interruption),
after 1 minute of inactivity. Last, the option “
BACKLIGHT ALWAYS
ON
” will keep the backlight always on.
Figure3-14.Working hours
3.5
Change user’s code
Via this option the user can change the code for level 2 access. By
selecting this option the screen on the right appears. To type the
code, use the up/down keys to adjust each digit and right or left to
move between digits. When the new code is typed press Enter to
save. You will need to enter code again for confirmation. The new
code replaces the previous.
WARNING
: Changing the user’s code is an action that must be taken
responsibly. If the user’s code is lost, the only way to restore the code
is by accessing with technician code (level 3 access only).
Figure3-15.Enter new user code
