![background image](http://html1.mh-extra.com/html/olt/9x6-cabana-bevel/9x6-cabana-bevel_assembly-manual_3831876029.webp)
61.
Trim out front and rear walls by attaching
Top Wall Trim
. Position with thick end of Bevel
downward at top of wall, tight against Soffits.
Attach with
4 - 1 1/2” Finishing Nails
per piece.
Parts
Top Wall Trim (Bevel)
(3/4” x 1 1/2” x 34 3/4”)
x 5
Hardware
N1
- 1 1/2” Finishing Nails
x 20 total
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 29
62.
To trim out corners, start with a
Corner Trim
, align tight
underneath Soffit and Rafter. Align
Wide Corner Trim
with
bottom of Corner Trim. Corner Trim will cap the Wide Corner
Trim. Do a dry run in each corner before attaching to confirm
positioning. Use
8 - 1 1/2” Finishing Nails
per piece to
secure. Complete other front corner the same.
Parts (Steps 62 - 63)
Corner Trim
(1/2” x 3 1/2” x 79”)
x 4
Wide Corner Trim
(1/2” x 5 1/2” x 82”)
x 4
Hardware (Steps 62 - 63)
N1
- 1 1/2” Finishing Nails
x 64 total
Corner Trim
Wide Corner
Trim
Align bottoms of both corner
trim pieces flush.
Fit Corner Trim tight
underneath Soffit.