49.
Do not attach roof panel onto rafters until all panels are positioned and spaced. In the meantime,
have your helper hold the panel in place so it doesn’t slide off. Locate 2nd roof panel.
50.
Place 2nd panel on rafters and over-
lap panel with the first outside panel as
shown on the right illustration.
51.
Place remaining 3rd and 4th metal roof panels on rafters as per
Steps 48-50.
On the ends, panel
should overhang the battens approximately by 2” on both ends. Adjust as necessary. Once Metal Roof is
spaced correctly from side-to-side and top-to-bottom, lift panels up and run a bead of caulking down the
overlapping seams of each panel to seal the joints.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 24
Bead of
caulking.
