![background image](http://html.mh-extra.com/html/olt/8x12-spacemaker/8x12-spacemaker_assembly-manual_732310025.webp)
91” Across
39.
Roof Gussets
are positioned on mid rafters. Have two helpers push the
Side Walls at the top from the outside of shed until inside to inside measurement
between the Top Plates is 91”. Slide Gusset up on side of Rafters. Gusset must
be below top edge of rafter. Use level to square Gusset and attach to Rafters
with
4 - 2” Screws
. Pilot hole each Gusset end with 1/8” drill bit.
Parts
Roof Gussets
(3/4” x 3 1/2” x 72”)
x 3
Hardware
S3
- 2” Screws
x 12 total
1 1/4” Screw
2” Screws
1 1/4” Screw
2” Screws
2” Screw
2” Screw
41.
Attach all Single and Double Rafter
Brackets where rafters meet Top Wall Plates
inside of shed. Attach with
2 - 1 1/4” Screws
and
2 - 2” Screws
per
Single Rafter
Bracket
and
6 - 2” Screws
per
Double
Rafter Bracket
.
Have two helpers hold the Side Walls at the
top from the outside of shed to keep the
inside-to-inside measurement between the
Top Plates at 91”.
Hardware
Y30
- Single Rafter Brackets
x 6 total
Y31
- Double Rafter Brackets
x 4 total
S2
- 1 1/4” Screws
x 12 total
S3
- 2” Screws
x 36 total
40.
Complete
remaining 2
Gussets as per
Step 39.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 25