MANUFACTURER’S CE DECLARATION of CONFORMITY according to EN 45014
OLIVETTI S.p.A
Via Jervis, 77 - IVREA (TO) - ITALY
Declares under its sole responsibility that:
this fax model distributed on the market under the Olivetti brand name
is IN COMPLIANCE with directive 99/5/EC dated 9
th
march 1999
fulfills the essential requirements of
Electromagnetic Compatibility and of Electrical Safety
as prescribed by
the Directives:
89/336/EEC dated 3rd May 1989
with subsequent amendments (Directive 92/31/EEC dated 28th April 1992
and Directive 93/68/EEC dated 22nd July 1993);
73/23/EEC dated 19th February 1973
with subsequent amendments (Directive 93/68/EEC dated 22nd July
1993),
since designed and manufactured in compliance with the following European Harmonized Standards:
EN 55022 : 1999
(Limits and methods of measurements of radio interference characteristics of Information
Technology Equipment) / Class B;
EN 61000-3-2
(Electromagnetic Compatibility (EMC) - Part 2 : Limits - Section 2 : Limits for harmonic current
emissions (equipment input current
≤
16 A per phase);
EN 61000-3-3
(Electromagnetic Compatibility (EMC) - Part 3 : Limits - Section 3 : Limitation of voltage
fluctuations and flicker in low voltage supply systems for equipment with rated current up to and including
16A);
EN 55024 : 1998
(Electromagnetic Compatibility – Information technology equipment – Immunity
characteristics – Limits and methods of measurement);
EN 60950 –1 : 2001
(Safety of Information Technology Equipment, including electrical business equipment).
Moreover the product is in compliance with following Standards
ETSI TBR 38 : May 1998
(Requirements for a terminal equipment incorporating an analogue handset function
capable of supporting the justified case service when connected to the analogue interface of the PSTN in
Europe);
ETSI TBR 21 : January 1998
Requirements for pan-European approval for connection to the analogue Public
Switched Telephone Networks (PSTN) of TE (excluding TE supporting the voice telephony service) in which
network addressing, if provided, is by means of Dual Tone Multi Frequency (DTMF) signaling.
Compliance with the above mentioned essential requirements is shown by affixing the
CE marking
on the product.
Scarmagno, 15
th
June 2005
Olivetti
S.p.A.
Notes: 1) CE Marking has been affixed in 2005
2) The Quality System is in compliance with the UNI EN ISO 9000 series of Standards
Olivetti S.p.A.
Sede Sociale Ivrea, Via Jervis, 77 - Cap. Soc. Euro 78.000.000 - C.C.I.A.A. Torino n. 547040 - Trib. Ivrea Reg. Soc. n.1927 - Cod. Fisc. e Part. IVA 02298700010
