13
B
ASIC
TRANSMISSION
AND
RECEPTION
OPERATIONS
Now that your fax machine has a name and number, it is ready to
operate and be used for the following functions:
•
Transmitting
documents (also in broadcast mode, from the
memory, or by polling)
•
Receiving
documents (also by polling)
•
Making telephone calls
(see the chapter “
Making a call
”)
•
Copying
documents (see chapter “
Making a copy
”).
T
RANSMITTING
A
DOCUMENT
W
HAT
DOCUMENTS
CAN
BE
TRANSMITTED
Sizes
•
Breadth
min. 148 mm - max. 216 mm
•
Length
min. 216 mm - max. 600 mm
Sheet thickness
80 g/m
2
(max. 20 sheets)
60 - 90 g/m
2
(max. 10 sheets)
50 - 140 gr/m
2
(1 sheet at a time)
For
documents of a different size from those specified
, you can
use a transparency with a rear sheet as a document holder.
N
EVER
USE
•
rolled paper
•
excessively thin paper
•
torn paper
•
damp or wet paper
•
excessively small paper format
•
crumpled paper
•
carbon paper
In order to avoid damaging your fax machine and invalidating your
guarantee, make sure that the documents you are to use are in good
condition and do not contain:
•
staples
•
paper clips
•
adhesive tape
•
correcting liquid or glue that has not yet dried.
In all such cases, photocopy the document and transmit the copy or
use a transparency cover.
P
LACE
THE
DOCUMENT
IN
THE
ADF
1. Insert the automatic document feeder (ADF) in the openings
provided for this purpose.
2. Push in the ADF until it clicks into position.
Attention
:
You must not force the original.
3. Insert the document with the side to be transmitted facing upwards
(automatic document feed).
The bottom edge of the original is fed into the ADF and the display
shows on the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NORMAL.
S
ETTING
CONTRAST
AND
RESOLUTION
Before transmitting a document you can make some
adjustments
to
optimise
the printing quality.
S
ETTING
THE
CONTRAST
1. Press the key
until the display shows:
FAX SET-UP
2. Press the key:
The display shows:
DATE AND TIME
3. Press the key:
The display shows:
VARIOUS SETTINGS
4. Press the key
until the display shows:
CONTRAST:NORMAL
5. Press the key
/
until the other available options “DARK” and “LIGHT” are
shown.
6. To confirm the selection, press the key:
