2FD/2FF/2FG
1-3-19
Figure 1-3-34
Figure 1-3-35
Figure 1-3-36
Leveling bolts
Stay
M4
×
16 chrome
TP screws
Leteral size adjuster
Sliders
Sliders
Leteral size adjuster
Screw
Screw
10. Turn the four leveling bolts until they reach
the floor and adjust them to level the
machine.
11. Fit the stay to the lower left of the large paper
deck toward the rear using the two M4
×
16
chrome TP screws such that it makes contact
with the floor.
Note:
Do not fit the stay if the finisher is to be
installed.
Setting the paper size
1. Open the large paper deck.
2. Move the sliders at the machine front and
rear inward (two at each point).
3. Remove the screw from each of the front and
rear lateral size adjusters.
Summary of Contents for d-Copia 300
Page 4: ...This page is intentionally left blank...
Page 32: ...1 3 9 2FD 2FF 2FG 3 0 This page is intentionally left blank...
Page 351: ......
