Olivetti d-Copia 300, Service Manual

Page: 84 / 351

2FD/2FF/2FG
1-3-59
7. Align the rail retainer with the groove of the
guide rail and attach the rail retainer to the
guide rail. Make sure that the plate spring of
the rail retainer fits into the groove and the
edge of the guide rail fits between the pulleys
on the reverse side of the rail retainer.
8. Orient the guide rail such that its pulley is
positioned toward the copier.
9. Secure the rail retainer to the copier using
two M4
×
10 binding screws such that the
front and the rear gaps between the floor and
the rail retainer are approximately 10 mm.
Figure 1-3-139
Figure 1-3-140
Figure 1-3-141
Guide rail
Rail retainer
Plate spring
Rail retainer
Pullery
Guide rail
10 mm 10 mm
Rail retainer
Rail retainer
M4
×
10
binding screws