Olivetti d-Copia 300, Service Manual

Page: 181 / 351

2FD/2FF/2FG
1-5-7
Section Jam code Description Conditions
During the switchback operation of an original in the double-
sided original mode, the original switchback switch (OSBSW)
does not turn off within 7040 ms of turning on.
During the secondary original feed in the double-sided origi-
nal mode, the DP timing switch (DPTSW) does not turn on
within 433 ms of the original conveying motor (OCM) turning
on.
While scanning the first face (reverse face) of the original in
the double-sided original mode, the original switchback
switch (OSBSW) does not turn on within 770 ms of the DP
timing switch (DPTSW) turning on.
During the switchback operation of the second or later origi-
nal in the double-sided original mode, the original switchback
switch (OSBSW) remains off when the trailing edge of the
preceding original turns the DP timing switch (DPTSW) off.
A communication sequence error occurs between the copier
and the large paper deck.
The paper conveying switch does not turn on within 1550 ms
of the signal requesting paper ejection is output from the
copier.
During paper intake from the copier, the paper conveying
switch (PCSW) does not turn off within 1960 to 3480 ms (de-
pending on paper size) of paper conveying switch (PCSW)
turning on.
When ejection a stack of paper, the paper conveying switch
(PCSW) does not turn on within 1590 ms of the paper con-
veying motor (PCM) turning on.
When ejection a stack of paper, the paper conveying switch
(PCSW) does not turn off within 2260 to 3190 ms (varies de-
pending on the paper size) of the paper conveying motor
(PCM) turning on.
The finisher does not respond 15 s after the eject signal is
sent to the finisher.
See the 3000-sheet finisher service manual.
See the 3000-sheet finisher service manual.
See the 3000-sheet finisher service manual.
See the 3000-sheet finisher service manual.
Optional
DP
Optional
large pa-
per deck
Optional
built-in fin-
isher
Optional
3000-sheet
finisher
75
76
09
81
82
83
84
80
81
82
83
84
An original jam in the
switchback section 1
An original jam in the
switchback section 2
Large paper deck se-
quence error jam
Jam between the finisher
and copier
Intake jam
Jam during paper con-
veying for batch ejection
1
Jam during paper con-
veying for batch ejection
2
Jam between the finisher
and copier
Jam in paper entry sec-
tion
Jam in eject section of
non-sort tray
Jam in paper conveying
section of internal tray
Jam in eject section of
sort tray