Olivetti d-Color MF552, Operation Manual

Page: 22 / 83

Quick installation of the fax driver 3
3-4 d-Color MF552/452/362/282/222
3.2
3.2 Quick installation of the fax driver
Installation flow
The following explains the system setup flow to enable PC-Fax TX.
1
Prepare the fax driver.
% Prepare the DVD-ROM disk.
% Check the operating system (OS) version that supports the fax driver.
Ensure that the operation requirements of the printer driver are satisfied by the PC where you install the
fax driver.
2
Install the fax driver on the PC.
% Set up the software installation on the PC.
If the PC is running on Windows 7 OS or the Windows Server 2008 Revision 2, you need to change the
PC settings in advance.
% Install the fax driver on the PC using the installer.
After connecting the USB cable, mount the DVD-ROM disk on the drive, then install the software by
following the on-screen instructions.
% Carry out a test print.
Carry out a test print and verify that it is acceptable.
3
Preparation has finished.
Check the operating system (OS) version that supports the fax driver
For details on the PC's Operating System (OS) that supports the fax driver, refer to page 1-4.
Changing the installation settings (Windows 7 or Windows Server 2008 R2)
If the PC is running on Windows 7 OS or Windows Server 2008 Revision 2, change the current PC settings
before installing the fax driver.
1
From the Start menu, click [Control Panel] - [System and Security] - [System].
2
Click [Advanced system settings] on the menu to the left.
The [System Properties] screen appears.
3
In the [Hardware] tab, click [Device Installation Settings].
4
Select [No, let me choose what to do], select [Never install drive software from Windows Update.], then
click [Save Changes].
% When you have finished installing the printer driver, restore the selection for the options in Step 4 to
[Yes, do this automatically (recommended)].
5
Click [OK] to close the [System Properties] screen.