![background image](http://html1.mh-extra.com/html/oliver/6303/6303_owners-manual_3788818027.webp)
6303 Sander
OLIVERMACHINERY.NET
27
|
Page
Adjustments
Platen Angle Adjustment
The platen can be set vertically, horizontally, or
any position in between.
1.
To adjust the platen angle, unlock the platen
by pushing the lock lever towards the rear of
the machine.
2.
Set platen to the desired angle. Use a
woodworking square or protractor to
confirm the settings.
3.
Lock the platen by pulling the lock lever back
to the locked position.
Table Height Adjustment
To set the height of the main table:
1.
Loosen the two lock knobs that are below the
main table.
2.
Adjust the table height. Make sure the table
is positioned at least 1/16” above the bottom
edge of the sanding belt, so it is level with the
sanding belt.
3.
Tighten the table lock knobs when
adjustment is done.
To set the height of the contour sanding table:
1.
Loosen the lock knob on the table bracket.
2.
Adjust the table height. Make sure the table
does not touch the abrasive surface, and is
positioned at least 1/16” above the bottom
edge of the sanding belt.
3.
Tighten the lock knob when adjustment is
done.
WARNING
Position the table at least 1/16” above the bottom edge of the sanding belt. Doing
so prevents materials or body parts from getting caught between the table and
the belt, which can cause serious injury.
Summary of Contents for 6303
