Oliver 6303, Owner'S Manual

Page: 24 / 50

24 |
Page Oliver Machinery 6303 Sander
7. When the table is properly set up, loosen the
table lock knob and remove the entire table
assembly. When not using the contour
sanding table, keep the dust chute closed to
maximize dust collection efficiency.
Dust Collection
This sander can generate a lot of dust. Connect this
machine to a dust collection system.
The minimum CFM requirement for this sander is 650 CFM
at the dust port, which means the dust collection system
should have a rating greater than 650 CFM, as air friction
and leakage can reduce effective CFM at the dust port.
IMPORTANT
Running this sander without a dust collection system, or using a dust collection
system with inadequate suction may damage the machine and cause other
hazardous situations. Check your dust collection system regularly to make sure it
is not jammed or filled up.