6303 Sander
OLIVERMACHINERY.NET
23
|
Page
Set Up Contour Sanding Table
1.
Gather the table and all mounting hardware.
2.
Using the provided cap screws and flat
washers, mount the table bracket on the
motor.
3.
Loosen the dust chute lock knob. Swing the
dust chute to the back of the machine to
allow room to install the table.
4.
Install the lock knob, then insert the post
into the mounting bracket. Align the flat
surface of the post with the lock knob.
5.
Install the table and align it with the drive
drum. Ensure the table is not touching the
sanding belt.
6.
Tighten the mounting bolt and lock nut to
secure the table on the post.
Summary of Contents for 6303
