![background image](http://html1.mh-extra.com/html/oliver/6303/6303_owners-manual_3788818021.webp)
6303 Sander
OLIVERMACHINERY.NET
21
|
Page
Sanding Belt Installation
This sander is shipped with the platen in the
horizontal position. Tilt the platen to the vertical
position to install the sanding belt.
1.
The platen lock lever is located below the
table. Unlock the platen by pushing the lever
towards the back of the machine.
2.
Tilt the platen to the vertical position and
lock it down.
3.
Loosen the belt guard lock knobs. Remove
the belt guard from the mounting brackets.
IMPORTANT
Be careful when removing the belt guard as
the fence and the sanding belt are loosely
packed inside.
4.
Install the belt tension lever handle that is
located on the top of the platen assembly.
Use a mallet to gently tap the handle into the
lever.
5.
Move the lever to the “Loose” position.
6.
The sanding belt rotates counter-clockwise
when the sander runs. Make sure the arrows
on the back of the sanding belt align with the
direction indicator.
7.
Slip the belt evenly and gradually into both
drums, until the belt is sitting in the middle
of the drums.
8.
Tighten the sanding belt by moving the belt
tensioning lever back to the “Tight” position.
When the sanding belt is properly tensioned,
it should not slip off from the drums.
9.
Reinstall the belt guard and tighten the lock
knobs.
Summary of Contents for 6303
