Oliver 4265, Owner'S Manual, Page: 38 / 70

38 | Page Oliver Machinery 4265 Jointer
Maintenance
Routine maintenance keeps your jointer in top shape. Please follow the maintenance schedule below,
and use the maintenance record worksheet attached in the back of the manual to document all tasks
completed.
NOTICE: Maintenance schedule may vary for individual users due to different situations and
safety requirements.
WARNING
Disconnect machine from the power source before any maintenance work is
performed. After servicing the jointer, remove all wrenches and tools before
restarting the machine. Failure to comply can cause serious injury!
Maintenance Schedule
Interval Component
Every day Remove dust buildups from jointer and dust collection system.
Inspect power cord for sign of aging and damages. Replace as needed.
Every week Inspect and clean cutterhead. Remove any dust and resin accumulation.
Inspect/rotate/replace worn cutter inserts.
Apply rust protectant on unpainted cast iron surfaces.
Verify infeed/outfeed tables are coplanar.
Every month Check V-belt tension and replace if belt shows signs of cracking or glazing.
Every 6 months Lubricate worm gears with grease.
Notice : Motor bearings are permanently sealed and lubricated, and do not require lubrication.