Oliver 4265, Owner'S Manual, Page: 23 / 70

4265 Jointer OLIVERMACHINERY.NET 23 | Page
Leveling Machine
This jointer should be positioned on level, stable floor. If machine is rocking on the floor, or if it vibrates
excessively during operation, please adjust the rubber feet to level the machine:
1. Loosen the jam nut to unlock leveling foot.
2. Rotating the leveling foot to adjust its height.
3. Make adjustments on all other leveling feet until machine is
completely leveled.
4. Tighten jam nuts of all adjusted leveling feet.
Dust Collection
Jointer can generate a lot of wood shavings and dusts. Connect dust
collection system to this machine.
Minimum CFM requirement for this jointer is 700 CFM at the dust port,
which means your dust collection system should have a rating greater than
700 CFM, as air friction from the ducts reduces effective CFM at dust ports.
IMPORTANT
Running this jointer without dust collection system, or using a dust collection
system with inadequate suction, will cause dust and shavings to accumulate
inside the jointer. This can damage the machine and cause other hazardous
situations. Check your dust collection system regularly to make sure it is not
jammed or filled up.