Oliver 4265, Owner'S Manual, Page: 26 / 70

26 | Page Oliver Machinery 4265 Jointer
Infeed Table Depth Stop Knob
As a safety feature, a depth stop is set up to
prevent depth of cut goes beyond 1/8” for
jointing operations. To get more than 1/8” depth
of cut for rabbeting operations, pull and hold the
knob when lowering the infeed table.
Outfeed Table Height Lever and Lock
The outfeed table height adjustment lever is
located below the outfeed table. The outfeed
table height is locked by a locking cap screw.
Fence
This extruded aluminum fence has two
adjustable positive stops at 45° and 90°.
The fence can be retracted and raised above the
table to provide additional clearance for
servicing the cutterhead.
This fence comes with an auxiliary fence for
jointing thin stock. When not in used, it can be
securely hung on top of the main fence with the
fence hanging notch.
IMPORTANT: When deploying the auxiliary
fence, please be sure the plastic supporting
plates are sitting between the auxiliary fence
and the table. Without these plates, the
cutterhead will strike the auxiliary fence.