Oliver 10047VS, Owner'S Manual, Page: 38 / 58

38 |
Page Oliver Machinery 10047VS Shaper
Maintenance
Routine maintenance keeps your shaper in optimal condition. Please follow the maintenance schedule
below, and use the maintenance record worksheet attached in the back of the manual to document all
tasks completed.
NOTICE: Maintenance schedule may vary for individual users due to different situations and safety
requirements.
Task Frequency
Check spindle and quill for damages Every time when changing spindle.
Check electrical cord and plug for signs of failure Every day.
Remove dust from cabinet
Every week, or whenever there is heavy dust
buildup.
Re-coat table top with rust protectant Every week.
Check V-belt tension and wear Every month. Replace V-belt when it shows signs
of cracking or glazing.
Lubricate motor bearings **Not needed**
Motor bearings are permanently sealed and
lubricated.