Oliver 10047VS, Owner'S Manual, Page: 15 / 58

10047VS Shaper OLIVERMACHINERY.NET
15 |
Page
Setup
Shop Preparation
Space Requirement
The dimensions of this machine are 32-1/4“(L) x 32”(W).
You will need additional spaces for manipulating your
workpiece, electrical connection and dust collection.
Load Limits
This machine has a shipping weight of 511 lbs., and a net
weight of 396 lbs. Please ensure all lifting tools and building
structures have adequate load capacity, for transporting
and supporting the total weight of this machine, the
operator, and related items.
Electricals
Make sure properly sized circuit and electrical outlet are available near the machine. Please refer to
section “Electricals” on page 14 for details regarding electrical requirements.
Lighting
Adequate lighting is needed for operating this machine. Overhead, non-glare lighting should be installed.
Safety Labels
If this machine introduces a new safety hazard to your work place. Please display proper warning signs in
highly visible location(s).
Dust Collection
Wood dust created by this shaper is a health hazard. Connect this machine to a dust collection system.
Check the air suction regularly to ensure dust and shavings are effectively removed.
Dust masks should be available for using the shaper.
CAUTION
Air resistance and leakage in a dust collection system impacts its effectiveness. Use
a dust collection system that is rated above 800 CFM at dust port. Doing so
improves air quality in the workplace, and prevents machine from jamming.